Solidworks defaults to the standard scale of 1:2. My company uses a scale system of x"=1'-0". So for a drawing that is 1:2, our scale is 6"=1'-0". I am trying to set up an equation in the text box under scale to automatically convert whatever scale is chosen for the sheet to display in our scale system.
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Using Equations in Title Block Notes
- Thread starter sauersjm
- Start date
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question