Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Using HY8 for 3-Sided Culverts

Status
Not open for further replies.
RedRanger

RedRanger

Civil/Environmental
Feb 2, 2006
1
Does anyone know if you can use HY8 to design a 3-sided flat top culvert? I know you can design an arch, any help would be appreciated.
 
Status
Not open for further replies.

Similar threads

Hydro_TX-QC
  • Locked
  • Question
Include culverts in a peak runoff rate calculation?
Replies
1
Views
414
gbam
gbam
CanuckPE
  • Locked
  • Question
Hydraulic Area - Converting a box culvert to a series of circular culverts
Replies
3
Views
482
Ekenny_G
Ekenny_G
Dersnerman
  • Question
Help with Design Resources for Small Overflow Weir Design - Hydropower & Microhydropower
Replies
3
Views
6K
gbam
gbam
meatymatt
  • Question
4" Loamy Sand over 6'+- Sandy Clay Loam - What rate should you use for drawdown?
Replies
2
Views
7K
swazimatt
swazimatt
Structer01
  • Locked
  • Question
Another name for a Yard Inlet
Replies
7
Views
6K
swazimatt
swazimatt

Part and Inventory Search

Sponsor

Back
Top Bottom