using of *debond and *Fracture criterion

[yo56]

Hi

I would want to use *debond and *Fracture criterion with a CRITICAL STRESS. When the stress level arrived up to valu of critical stress the aborted. I think I have forget parameters but I don't see where. I would want than the failure opening when the stress is over 100MPa

Here my command line in the Edit Keywords:

*Debond, SLAVE=_PickedSurf434, MASTER=_PickedSurf433
0.0, 1.0
1.0, 0.0
*Fracture criterion, TYPE=CRITICAL STRESS, DISTANCE=0.04
1e8

Thanks for your reply