Jul 30, 2007 #1 danoo Mechanical Jul 27, 2007 26 When creating a blind hole, is the away to show drill point without creating another feature. Thanks, Danoo
When creating a blind hole, is the away to show drill point without creating another feature. Thanks, Danoo
Jul 30, 2007 #2 Guest0527211403 Mechanical Apr 24, 2004 1,125 Not without Wildfire 4 Upvote 0 Downvote
Aug 3, 2007 #3 675321 Mechanical Mar 2, 2007 4 Yes. In WF2. Add "hole_diameter_override yes" to your config.pro file. Use the tapped hole feature and uncheck "include thread surface" in the shape dialog box. Change the tap drill diameter to the diameter you want. Bob Upvote 0 Downvote
Yes. In WF2. Add "hole_diameter_override yes" to your config.pro file. Use the tapped hole feature and uncheck "include thread surface" in the shape dialog box. Change the tap drill diameter to the diameter you want. Bob
![[smile]](/data/assets/smilies/smile.gif "[smile] [smile]")