erm1212
Structural
- Nov 8, 2017
- 1
Hello all,
I have not yet found a convenient way to read material properties defined in input deck into UVARM subroutine (something like props for UMAT). Is there an option through function like GETVRM to read in the elastic and failure stress data?
Surely one could think about writing own script that will access inp deck, but this also means read/ operations for every integration/section point as well as programming "robustness" if user defines false *elastic type etc. Another option is using material name as information pass, which I am also not fond of.
Any tip is much appreciated.
E.
I have not yet found a convenient way to read material properties defined in input deck into UVARM subroutine (something like props for UMAT). Is there an option through function like GETVRM to read in the elastic and failure stress data?
Surely one could think about writing own script that will access inp deck, but this also means read/ operations for every integration/section point as well as programming "robustness" if user defines false *elastic type etc. Another option is using material name as information pass, which I am also not fond of.
Any tip is much appreciated.
E.