v belt standard 1

[MISSISSAUGA]

I have a drawing of conveyor belt with a v-guide somebody made. It has "K10 notch" note with no dimensions. I'm assuming it's european standard. where could I find its dimensions?

Thank you for your help.

 

[SincoTC]

I'm not familiar with that designation myself, but I saw mention of K10 notch belts when looking for some smaller guided belts recently, there were no dimensions for that particular size but it may be worth giving them a call as they're specialists and may have the info you need. (P18 below). They're in the States and I guess that you may be in Canada.

http://optimus.meleeisland.net/downloads/misc/fnsheprd_catalog.pdf

 

[MISSISSAUGA]

Thanks for the information.
I did more research from google and found some dimensions here and I would like to share.

http://www.shippbelting.com/v-guides.htm

http://www.bodebelting.com/44c1759df2f6182ec3a8927dcf683d9c_BodeBelting_Timing-Belts_GB.pdf

I'll do more research and post it here if I found more.

 

[diskullman]

10MM Also known in US as 3L designation in fractional horsepower belts

Russell Giuliano