Apr 28, 2006 #1 Slaen Automotive Joined Jan 23, 2005 Messages 128 Location US Hello I already added all the dimensions to a drawing but if I decide that I want all the ordinate dimensions to come from the opposite edge. Is it possible to change the zero corner to the other side?
Hello I already added all the dimensions to a drawing but if I decide that I want all the ordinate dimensions to come from the opposite edge. Is it possible to change the zero corner to the other side?
Apr 28, 2006 #2 solid7 Mechanical Joined Jun 7, 2005 Messages 1,403 Location US If you have already accepted the chart, then you will be forced to re-create it. The chart is not associative, and as such, has no way to be modified. --- CAD design engineering services - Catia V4, Catia V5, and CAD Translation. Catia V5 resources - CATBlog. Upvote 0 Downvote
If you have already accepted the chart, then you will be forced to re-create it. The chart is not associative, and as such, has no way to be modified. --- CAD design engineering services - Catia V4, Catia V5, and CAD Translation. Catia V5 resources - CATBlog.