Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

V5 multiselect

Status
Not open for further replies.

boffin5

Aerospace
Joined
Dec 31, 2003
Messages
96
Location
US
Here is one that everyone but me knows, I'm sure.
In my model I have surfaces, lines, curves, points, etc.
How do I pick all the curves, for example, in order to no-show?
In v4 it's *crv, but of course Dassault had to change it for v5.
 
Thanks for the response, but I'm not sure what you mean. What I expect to see is a pull-down somewhere, that lets me select 'all curves' or something to that effect.
 
You can do that. Control+F or Edit->Search.

Search by type.

The *.curve command works from the power-input box at the bottom right of your CATIA window. Type it in an hit enter.

 
I'd like to add to what Lee suggested:

1. Use TOOLS+SHOW (or TOOLS+HIDE) and then you can choose which element type to hide. TOOLS+HIDE+GEOMETRIC SET will no-show everything but the solid

2. In the lower-right corner of the CATIA window, click in the white box (power input), and key-in: t=curve This will search and select all elements types that are "curve"

3. As Lee said, use EDIT+SEARCH for all the search commands (more than V4) and save them as your favorites
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top