Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vault Question 1

Status
Not open for further replies.
Joined
Feb 28, 2005
Messages
95
Location
US
I'm using the Vault software with the vault located on the server. I have a couple questions / problems...

1. I was using the "add project" from the vault in Inventor file menu to get stuff into the vault. It stopped working and when I do the add project thing now, It scans my local side and doesn't put anything in...

What am I doing wrong?


2. What is the best way to get files into the vault? Is there a good resource that explains vault stuff simply?


Thanks...
 
When you finish making your change(s), save and click on the "Model" button on the top of the window where your tree is. If you are in the correct project (C:\Vault...) then you will have a pull down selection for "Vault." When you select it you will then see the file name and you'll see that it needs updating. Right-click on the file name and "Add Files." This is the process I use to get my stuff into the vault.

By the way, no there is not a good resource for vault or productstream that I know of.
 
The only Vault resource that I know if a 121 page pdf file that can be accessed (in 2008) by launching productstream and when the Welcome window comes up, click Learn More. Then on the right side click on 'Managing you Data'.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top