Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations Toost on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vector group

Status
Not open for further replies.
prc

prc

Electrical
Aug 18, 2001
2,010
In an isolation transformer feeding a VFD of a synchronous machine has following indications for connection and vector group:

IIIyo/IIIzo.40/yz11.20

What does it indicate?This is as per which standard?
 
Status
Not open for further replies.

Similar threads

slavag
  • Locked
  • Question
78V/Vector Shift/Voltage Surge/Vector Surge protection in the Distribution Generation system
Replies
2
Views
1K
slavag
slavag
AHSEN_MEP
  • Locked
  • Question
Generator 400v output to 11kv step up transformer - need vector group confirmation
Replies
3
Views
313
Palletjack
Palletjack
Callum5593
  • Locked
  • Question
11/3.3kV Dy11 transformer implies no neutral on LV side but neutral connection shown in vector diag.
Replies
7
Views
354
waross
waross
electrical429
  • Locked
  • Question
Is there a good tutorial on transformer vector group change using cable phase swap and rollover? 3
Replies
5
Views
727
mvcjr
mvcjr
LJP1
  • Locked
  • Question
Form 5, Two Wattmeter Method secondary vectors for testing.
Replies
2
Views
91
LJP1
LJP1

Part and Inventory Search

Sponsor

Back
Top Bottom