Vehical Dimensions

[JonYoung]

I'm looking for vehicle datd for my turning program. I need the cab lengh, cab overhand, cab WB, distance form rear wheels to king pin/ hitch, if there is a trailer, lock to lock time, stearing angle, artiulating angle, cab width, cab WB width, trailer width, trailer WB width, trailer distance form kingpin/ hitch to center of wheel, overall trailer dimmension, and the distance from the front of the trailer to the kingpin/ hitch. If anyone could help me out on this information on alot of vehicles that would be helpful.

Thanks for the help

 

[bridgebuster]

The AASHTO Green Book has some of the info you need.

 

[jdonville]

JonYoung,

AASHTO has "design" vehicles defined for structural load and (I assume) geometric design. You should use these unless there is a specific vehicle that you need to accomodate.

Jeff