Chaitanya07
Mechanical
- Jan 28, 2021
- 1
how to intialize both droplets with initial velocities, one droplet velocity in positive x direction and another droplet in negative x direction in fluent solver. i defined the zones for each droplets seperately in the domain ,i patched the zones with initial velocity but while simulation the droplets are not moving. what frame of reference should i use, relative to cell zone or absolute?
please see the jpg file of my domain setup and i also attached .wbpj file ,please suggest improvements and corrections.
please see the jpg file of my domain setup and i also attached .wbpj file ,please suggest improvements and corrections.