farzad1366
Civil/Environmental
Dear All
could anyone tell me how to verify a topic if there is differences in dimention?
could anyone tell me how to verify a topic if there is differences in dimention?
Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Verification
- Thread starter farzad1366
- Start date
- Status
My general process:
-Call up the architect/ draftsperson who did the original drawings to confirm that you know which dimension is the right one (if it is a building dimension)
-If it is a piece/component dimension you think is wrong just call up the designer and have a conversation
-Call around to the people who have it wrong and (politely) inform them of the correct dimension
Don't be intimidated, most people are just happy someone caught the mistake before it got too far!
-Call up the architect/ draftsperson who did the original drawings to confirm that you know which dimension is the right one (if it is a building dimension)
-If it is a piece/component dimension you think is wrong just call up the designer and have a conversation
-Call around to the people who have it wrong and (politely) inform them of the correct dimension
Don't be intimidated, most people are just happy someone caught the mistake before it got too far!
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question