Very Basic NX6 Training and Tutorials 1

[Wicsteve]

I'm looking for an 'on-line' or downloadable tutorial to help cross-train some of our Pro-E and Solid Edge CAD operators to use NX-6. I'm not interested in full NX training or in any certified NX training program.

I've come across several tutorial programs to do this, either from Siemens, or from other independent sources. Some tutorial programs cost $200-$500 price range. Would like some recommendations before choosing or purchasing.

 

[potrero]

The CAST (Computer Aided Self-Teach) program from Siemens is integrated into NX and (I think) should come included with your license. It is a very useful program; really helpful in learning. It consists of a lot of "solved problems", where you are walked step-by-step through many different modeling situations. A large part library is included to work with on the examples.

 

[JohnVincent]

Take a look at myigetit.com. I have used this a couple years ago at the company I was at, at that time. It is very good for teaching new empolyee's NX or those that come from other softwares.