Hi, I need to know how to create a threaded rod in Solidworks. I have designed a guide bracked in solidworks and need to represent a threaded rod (stud) that is welded to the center of the bracket. The rod needs to have 1/4-20 threads and nuts attached. I have done the tutorials and I am familiar with how to add nuts from the toolbox, but i cant figure out how to create the threaded rod. I'm sorry to ask such a basic question, but hopefully someone will be willing to help. Thank you!
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Very Basic Question: How to create a threaded rod
- Thread starter nickta99
- Start date
Easily? use Cosmetic Threads... read SolidWorks Help Topics, that should be all you need.
If you want to model true helix-based threads, read thread559-113210 for some pointers.
[green]"I think there is a world market for maybe five computers."[/green]
Thomas Watson, chairman of IBM, 1943.
Have you read faq731-376 to make the best use of Eng-Tips Forums?
If you want to model true helix-based threads, read thread559-113210 for some pointers.
[green]"I think there is a world market for maybe five computers."[/green]
Thomas Watson, chairman of IBM, 1943.
Have you read faq731-376 to make the best use of Eng-Tips Forums?
CorBlimeyLimey
Mechanical
You could also use a thread texture if you have SW04 or SW05.
![[cheers]](/data/assets/smilies/cheers.gif "[cheers] [cheers]")
& all the best.
& all the best.- Status
Similar threads
- Locked
- Question
- Locked
- Question