VIEW BOUNDRY BREAKE SHAPE- NX 7.5 2

[CAD2015]

Hi,

How could I create a view with boundary shape like the one created in the attachemnt?(It simulate a break symbol)

Thanks

 

[cowski]

The 'broken view' will produce what you want. If you search for 'broken view' in the drafting help, it will give you a good overview of what it is and how to use it.

 

[JohnRBaker]

I would suggest that you try using...

Insert -> View -> Broken...

...but instead of defining two end sections while removing the center, instead just define a single center section removing the two ends, as seen below:

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[CAD2015]

Thank you both very much! I can't wait to get to work tomorrow and apply your suggestions!

 

[CAD2015]

John,

I can't follow your option, but I'd love to learn it.
Could you send me a sample and step-by-step direction, please?...

Thanks

 

[JohnRBaker]

See attached video.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

UG/NX Museum:

http://www.plmworld.org/p/cm/ld/fid=209

To an Engineer, the glass is twice as big as it needs to be.

 

[CAD2015]

Perfect!..............Thanks a lot!