Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

View>Update>Sheets instruction in CREO 5 drawings

Status
Not open for further replies.

Tunalover

Mechanical
Mar 28, 2002
1,179
I'm using CREO 5. Has anyone else noticed that Subject instruction doesn't work? My interpretation of the command is that it will update every view on every sheet, but I find that it doesn't work per my interpretation.

Can anybody correct my thinking or shed some light on the issue?

Thanks,
Bruce


Tunalover
 
Replies continue below

Recommended for you

Newest available release of Creo is 3.0 M100. You must be using Wildfire 5.

In Wildfire 4 it only updates the sheet you are on.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
 
depends if you use the menu option (and which) or button.
 
dgallup:
The program I'm using is called Creo Elements/Pro 5.0. Is that not Creo 5?


Tunalover
 
No, it's one of the worst naming conflicts ever dreamed up by moronic marketers. When PTC had the bad idea of renaming their CAD suite from Pro/E to Creo, they took the existing Pro/E Wildfire 5 and slapped that stupid moniker on it without changing anything other than the startup splash screen.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor