View updating issues

[Alderfek]

Having an issue with views not updating on an assy dwg using 7.5 .
Had to make some changes to the model and now the views wont update and I get the evil
View Update Report
------------------

View name: BACK@58
View type: Imported view
Error: Internal error: memory access violation

What would cause this ? And I honestly dont want to or have the time to redo 2 pages woth of imported views and projected views/details taken from this view.

Kirk Alderfer
Technical Cartoonist
Engineered Fabrics Corporation
Rockmart, Georgia

"Imagination continually frustrates tradition, that is its function." -John Pfeiffer

 

[JohnRBaker]

If this is what I think it is, you're probably still running NX 7.5.0. This issue has been resolved with NX 7.5.1 so I recommend that if you have not yet installed the NX 7.5.1 MR that you do so as soon as possible.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[Alderfek]

Well I am going to assume that the detailer who updated the drawings for me is running 7.5 . I myself am running 7.5.1 .
So what is happening with the file ? Im curious now.

Thanks,
Kirk

Kirk Alderfer
Technical Cartoonist
Engineered Fabrics Corporation
Rockmart, Georgia

"Imagination continually frustrates tradition, that is its function." -John Pfeiffer

 

[JohnRBaker]

It has nothing to do with the file, but rather the version of the software you're running. If you're running NX 7.5.1 and you're seeing this problem, then it's something new and you should report it to GTAC.

John R. Baker, P.E.
Product 'Evangelist'
Product Design Solutions
Siemens PLM Software Inc.
Industry Sector
Cypress, CA

http://www.siemens.com/plm

http://www.plmworld.org/museum/

To an Engineer, the glass is twice as big as it needs to be.

 

[Alderfek]

Red alert guys....

IR Description: View update problem. internal error on each view.


Dear Kirk,

Your recent call to the Technical Access Center, Incident Report (IR) Number 6418422 opened on 04-OCT-2010, has been researched by our GTAC software engineers. It has been determined that this IR requires resolution by our NX development team. This IR was converted into a problem report (PR) 05-OCT-2010 and is now referenced as PR Number 6418422, with a priority code of 1 Critical.

We will advise an updated status by e-mail when the issue is resolved. You may also access our call-tracking tools on the Internet to view the status. Point your web browser to

http://support.ugs.com.

Once there, select the 'Status of an Issue' icon in the GTAC Featured Services area. Be ready to supply your WebKey username and password.

Thank you for contacting the Global Technical Access Center.

Sincerely,

The Global Technical Access Center Team


Kirk Alderfer
Designer
Meggitt Polymers & Composites
Rockmart, Georgia

"Imagination continually frustrates tradition, that is its function." -John Pfeiffer

 

[Alderfek]

Talked with the Gtec guys yesterday and the coding is fixed, now they have to decide what MP to add it to

Along the same lines, when you add a detail view to your drawing and you make any revisions to your model, it kills your connectivity to the master view. The only way to get that back is to go to MB3 and make it an independent view.

Kirk Alderfer
Designer
Meggitt Polymers & Composites
Rockmart, Georgia

"Imagination continually frustrates tradition, that is its function." -John Pfeiffer

 

[Alderfek]

Just installed 7.5.2 and it fixes the problem.

Kirk Alderfer
Designer
Meggitt Polymers & Composites
Rockmart, Georgia

"Imagination continually frustrates tradition, that is its function." -John Pfeiffer