Viewing Entities

[KnowClue]

I have all layers on but cannot see any datums, curves, or sketches. I could see all these items before I did a SaveAs. Thanks in advance.

 

[JohnRBaker]

Did they disappear immediately after performing the 'Save-As' operation or only when you reopened the file?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[KnowClue]

Only when I reopened the file. The new one that is.

 

[JohnRBaker]

Are they Hidden?

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Digital Factory
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.

 

[jmiklovic]

I had this issue in past versions after a particular designer worked on a part. Somehow he had set visible in view layers specifically to a saved view in modeling. To fix I would right click in the window off of the part, click 'replace view' and select any one of the views that popped up and it fixed the problem. I never did figure out what was causing it to screw up, but that fix worked for me.

Jay Miklovic
Sr. Design Engineer
Edco Inc.

 

[KnowClue]

Jay, that worked. The only difference was, replace view did not come up with a right click. I had to select view, layout, replace view. Thanks very much.