Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Visual examination records of threaded joints B31.3

Status
Not open for further replies.

KobusOakville

Mechanical
Sep 28, 2003
1
Are examination records required for threaded joints per B31.3?

It isn't clear if "In-Process Examination" in para. 344.7.1(a) and 344.7.1(g) includes threaded joints. Refer to para. 344.2.2 where specific requirements for visual examination records are listed.
 
Replies continue below

Recommended for you

A written procedure is required for visual examination. I do not recall any instances of in process examinations related to threaded joints. The ones I recall are as a substitution for radiography on welded joints, brazed joints, bonded joints, and closure joints.

There is not a requirement for a written record, other than that the examiner provide a certification to the owners Inspector that the requied QC has been performed.
 
See SecV Article 9 if VE is required.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor