Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

VME replacement board

Status
Not open for further replies.

fsmyth

Electrical
Jan 1, 2005
220
0
0
US
Haven't had much luck on other forums, so I will try here:

I need to find a 6U 386 or 486 processor board for a
VMEbus, preferably with the associated hard/floppy drive
board to plug into it. The original vendor was
"Logical Design Group", the board type is "XP-Platform",
the BIOS is Quadtel 286(!) / XP+ SYS V1.20.
There is a label: "C9537WAB/94050-1-MOD"
On-board IDE/FDD, front panel: VGA/LPT/COM1/COM2/keyboard.
It HAS to be 386/486 (don't ask). The drives on the
current second board are pretty much standard laptop.
<als>
P.S. did I mention that this is an emergency (railroad
equipment down and non-functional until replacement)?
And that the equipment manufacturer has no suitable
inventory? Or that the machine is one-of-a-kind, and
about 12 years old?
 
Status
Not open for further replies.
Back
Top