Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

VME2 for ANSYS/LS-Dyna

Thread starter juzz
Start date Jan 31, 2007

Status: Not open for further replies.

Jan 31, 2007

juzz

Mechanical

Hello!

I have run VME2 from Verification Manual and the results are different from what is written in the manual. I have a maximum deflection of 0.240 instead of 0.226 and of course the checked results ratio is also different.
Anyone knows what happened?

Also, if there are other usefull benchmark tests for ANSYS/Ls-Dyna that could be used ina QA evaluation please let me know.

Thank you!!

Best regards,

Juzz