Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

vortex breaker at the butom of towers 1

Status
Not open for further replies.
keyvann

keyvann

Mechanical
Dec 25, 2002
6
what's the best vortex breaker shape & dimension for 34" pipe .
 
Replies continue below

Recommended for you

Sort by date Sort by votes
TYPICAL VORTEX BREAKER DIMENSIONS ARE

1) NOMINAL DIAMETER OF NOZZLE SIZE + 150MM AS TOP DISC DIAMETER AND THE VORTEX BREAKER HEIGHT WILL BE NOMINAL DIAMETER OF NOZZLE

2) OTHER TYPE IS HAVING THE TOP DISC DIAMETER AS 2 TIMES THE NOMINAL DIAMETER OF NOZZLE AND THE HEIGHT OF VORTEX BREAKER IS ONE TIME THE NOZZE DIAMETER
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

FPPE
  • Question
PV Elite Report - Tubes of the bundle
Replies
4
Views
2K
FPPE
FPPE
Gears6580
  • Question
Code calculations to determine the thickness of the flat plate to blank leaking tubes
Replies
3
Views
262
r6155
r6155
FPPE
  • Locked
  • Question
Coefficient of friction Inconel 625 - Inconel 625 at 427 °C 1
Replies
3
Views
171
FPPE
FPPE
Europeeng
  • Locked
  • Question
PV-Elite Local Loads applied at end of Nozzle 3
Replies
4
Views
215
Solar_Greed
Solar_Greed
misc
  • Locked
  • Question
Account for the Local Notch or Effect of the Weld - ASME Code Fatigue Analysis
Replies
3
Views
171
TGS4
TGS4

Part and Inventory Search

Sponsor

Back
Top Bottom