Mar 15, 2016 #2 msquared48 Structural Aug 7, 2007 14,745 US Metal straps attached to the panel too? Thermoply? Mike McCann, PE, SE (WA) Upvote 0 Downvote
Mar 16, 2016 #3 boo1 Mechanical Oct 31, 2001 2,129 US notice the staples at the right edge, and jagged cut edge. Agree with Mike Upvote 0 Downvote
Mar 24, 2016 Thread starter #4 SpiderM Structural May 7, 2006 34 US It was Thermo-Ply and no metal straps. (The gymsum was removed and I cut a section out with a pen knife.) Thanks again. You were able to allow me to get a jump on my research. Best regards; J.D. Dixon, JR., PE (TX) Upvote 0 Downvote
It was Thermo-Ply and no metal straps. (The gymsum was removed and I cut a section out with a pen knife.) Thanks again. You were able to allow me to get a jump on my research. Best regards; J.D. Dixon, JR., PE (TX)
