Water ejector for ballast & cargo stripping

[Jinhyen]

Hello,

I am looking for any documentation/book or calculation software to design water ejector for above purposes.
Normally, it will be installed in liquid cargo vessel for cargo stripping as well as any vessel for water ballasting.
So, please introduce any reference.

Thanks in advance.

H. Jin

 

[unclesyd]

I would take a look at these two sites to get a general idea of what's out there accomplish what you are proposing to do.

http://www.penberthy-online.com/jet.asp

http://www.eductor.net/

 

[Jinhyen]

Dear Unclesyd,

Thank you for your information on my query.
If possible, could you let us have any book(guide) to design water eductor?
Your information is referred to manufacturer's website.

Thanks again.

H. Jin

 

[zdas04]

Just a (probably not very helpful) clarification: "Ejectors" are devices designed for a compressible power fluid and have a three-section throat. "Eductors" are devices designed for incompressible power fluid and have a two-section throat. In your search you'll do better looking for Eductors or Jet pumps.

http://www.IHS.com

has a set of documentation for some old Fortran programs for sale. I think it cost me about $800 US to download the documentation and have access to the programs. The programs are OLD Fortran and the user interface is really kludgy, but the results are interesting.

David Simpson, PE
MuleShoe Engineering

http://www.muleshoe-eng.com

Please see FAQ731-376 for tips on how to make the best use of Eng-Tips Fora.

The harder I work, the luckier I seem

 

[Jinhyen]

Dear David,

I am interesting in Fortran program for eductor. I tried to find out the related document or program in IHS website, but I could not find it.
If possible, please let me know how to find this program.
Or, could you show me a sample result for this program?

Thanks

H. Jin