sennafan
Structural
- Jul 25, 2006
- 25
I have been looking for information regarding what is an acceptable amount of misalignment of pipes. Specifically I am looking at a repair where an apparemntly threadless splice fitting is used above a new valve and the centerline of the connected 2" steel pipe that extends from the fitting is approximately 4 degrees off from the centerline of the valve and fitting.
Second question: is it mandatory that water service pipes of this size be restrained from moving, or left to the installers judgement. Local water pressure can hit 80 to 100 psi in places.
Second question: is it mandatory that water service pipes of this size be restrained from moving, or left to the installers judgement. Local water pressure can hit 80 to 100 psi in places.
