Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Weld Seam / Bead Width

Status
Not open for further replies.
oguzzz

oguzzz

Mechanical
Mar 1, 2020
14
Good day to all,

What is the weld seam/bead width tolerance for as welded longitudinal and circumferential joints according to ASME SecVIII Div1/SecIX/AWS D1.1?

Thanks in advance
 
Replies continue below

Recommended for you

Sort by date Sort by votes
I don't recollect any restrictions in either AWS structural codes or ASME construction codes. I do recollect a restriction in API 1104.


Best regards - Al
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

K.P.M.
  • Locked
  • Question
Insert plate width reduction 1
Replies
3
Views
1K
TGS4
TGS4
ird192
  • Question
nozzle to head weld NDE
Replies
6
Views
4K
TomLee777
TomLee777
V
  • Locked
  • Question
Is pressure retaining fillet weld qualification by fillet weld possible under ASME IX. 2
Replies
3
Views
2K
IdanPV
IdanPV
K.P.M.
  • Locked
  • Question
Shell-Dish Joint weld applicability
Replies
6
Views
402
r6155
r6155
MUHAMMAD FAHAD RANA
  • Locked
  • Question
Fillet Weld Symbol Confusion
Replies
2
Views
348
DVWE
DVWE

Part and Inventory Search

Sponsor

Back
Top Bottom