ray78
Mechanical
- Feb 21, 2008
- 2
Hi,
Inserting a weld in the assembly in pro/weld and creating a weld symbol in the drawing using “Show/Erase”, A weld sequence number is displayed at the end (tail) of each weld symbol. Can this number and the following colon be removed “<1:” to replace with a manual text.
thanks,
ray
Inserting a weld in the assembly in pro/weld and creating a weld symbol in the drawing using “Show/Erase”, A weld sequence number is displayed at the end (tail) of each weld symbol. Can this number and the following colon be removed “<1:” to replace with a manual text.
thanks,
ray