Welding Joint Repair

[Inchtain]

I would appreciate it if you could inform me whether it is allowed to repair a root defect in an 8" and 12" pipe welding joint from inside of the pipe by chipping off the defect and welding the root pass again.

Thanks

 

[goutam_freelance]

B 31.1 or B31.3 does not forbid the repair of the root defect of welding. The repaired weld has to undergo NDT as per code, and a qualified welder to be used.

However, it may be difficult to weld a 8" pipe from inside.

 

[weldstan]

It cerrtainly has been done on large diameter pipe and is not prohibited under B31.1, B31.3, B31.8 and other Codes.

 

[r6155]

What code is...?
Is this a new construction project?
What type of defects?
Was the joint completed or just the root pass?
Thickness of pipe, material?

 

[EdStainless]

What are your clients rules about weld repair?
Commonly you would have to grind it out, then perform NDT to show that you are into sound metal, and then re-weld.

 

[Inchtain]

What code is...?
Is this a new construction project?
What type of defects?
Was the joint completed or just the root pass?
Thickness of pipe, material?

ASME B31.3
Replacement project
Burn through
The joint was completed
8" 8.18mm and 12" 12.7mm

 

[LittleInch]

Why can't you get to the outside of the pipe?

 

[Inchtain]

Why can't you get to the outside of the pipe?

No problem with that, but I look for permitted options