Welding opf MP35N

[roozle]

Can MP35N be welded.?

Also known as: UNS R30035; AMS 5758; Carpenter/Timken Latrobe MP35N.

Thanks,
roozle

Highest Regards,
Roozle

 

[metengr]

Yes it can. The web site below by Carpenter has all of the information you need regarding weldability of MP35N material;

http://www.cartech.com/sao_products/wr_sao_product.html?leftn=sao_products&lefto=empty&lefti=sao_ps0

 

[EdStainless]

Yes, but....
If you are using product in the 'cold worked & aged' condition you will not reach the same mechaical proerties in the welds (or HAZ). Depedning on the service and such you need to be careful where in the process sequence you weld with respect to cold working and heat treatments.

= = = = = = = = = = = = = = = = = = = =
Corrosion, every where, all the time.
Manage it or it will manage you.

http://www.trent-tube.com/contact/Tech_Assist.cfm