West. MOR-A

[mls1]

I'm looking for information on older Westinghouse MOR-A medium voltage motor overload relays. Is there a source for the protection curves, application, etc.? I've checked the CH/Eaton site with no luck.

The heater modules, and I suspect the curves, are labeled HTM ##, such as HTM 06. Any information would be appreciated.

 

[jwerthman]

I looked on the Cutler-Hammer web site and there is a lot of info about the MOR relays. I'm not sure it's what you need, though. Go to the search engine on the C-H site and search for MOR.

Good luck.