Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations GregLocock on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wet air added to Dry air with SiCl2

Status
Not open for further replies.
jppmj

jppmj

Chemical
Feb 24, 2003
15
I have to mix 750 m3/h dry air (water 0%)@ 60°C with 750 m3/h water saturated air @ 30°C. How to avoid plugging due to SiO2 (from reaction beetween SiCl4 and H2O) + Water.
The pipes and vessel are in PVC.
Thank You
JPPMJ
 
Status
Not open for further replies.

Similar threads

HotPotato
  • Locked
  • Question
Ammonia Tuning for Injections Rates to the Ammonia Injection Grid
Replies
1
Views
90
mbt22
mbt22
rahulsb
  • Locked
  • Question
Nitrogen Purging to open vent tank
Replies
7
Views
176
guerky
guerky
nsalhieh
  • Locked
  • Question
H2S removal from air stream
Replies
9
Views
83
bimr
bimr
pid3control
  • Locked
  • Question
Is there any single kinetic model relating bioremediation rate to temperature, pH, Depth & Nutri
Replies
3
Views
94
zelgar
zelgar
dalepittman
  • Locked
  • Question
Alternative to Sulfuric acid
Replies
3
Views
163
MatthewL
MatthewL

Part and Inventory Search

Sponsor

Back
Top Bottom