Mar 1, 2006 #1 peppinu Automotive Apr 21, 2003 270 Does anyone have info on from which cut of proe wf2 is compatible with PDMlink? Joe Borg
Mar 2, 2006 #2 looslib Mechanical Jul 9, 2001 4,205 Which version of PDMLink? All builds of WF2 should work with PDMLink7. PDMLink8 requires M160 or higher, I think. Maybe M140. "Wildfires are dangerous, hard to control, and economically catastrophic." Ben Loosli Sr IS Technologist L-3 Communications Upvote 0 Downvote
Which version of PDMLink? All builds of WF2 should work with PDMLink7. PDMLink8 requires M160 or higher, I think. Maybe M140. "Wildfires are dangerous, hard to control, and economically catastrophic." Ben Loosli Sr IS Technologist L-3 Communications
Mar 2, 2006 Thread starter #3 peppinu Automotive Apr 21, 2003 270 Thanks Ben. It will be version 8 Joe Borg Upvote 0 Downvote
Mar 3, 2006 #4 dgallup Automotive May 9, 2003 4,712 You can check product compatibility on PTC's web site: http://www.ptc.com/appserver/cs/doc/refdoc.jsp Upvote 0 Downvote
You can check product compatibility on PTC's web site: http://www.ptc.com/appserver/cs/doc/refdoc.jsp
