What are the best practices for creating a linkage? I know there is the assembly layout sketch, a 2D sketch and there is the possibility of just creating links and assembling them. TOP CSWP, BSSE www.engtran.com www.niswug.org www.linkedin.com/in/engineeringtransport Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3 "Node news is good news."

What are the best practices for creating a linkage? - DASSAULT: SOLIDWORKS 3D Design

Nov 1, 2011

kellnerp

Mechanical

What are the best practices for creating a linkage?

I know there is the assembly layout sketch, a 2D sketch and there is the possibility of just creating links and assembling them.

TOP
CSWP, BSSE

http://www.engtran.com

http://www.niswug.org

http://www.linkedin.com/in/engineeringtransport

Phenom IIx6 1100T = 8GB = FX1400 = XP64SP2 = SW2009SP3
"Node news is good news."

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

What are the best practices for creating a linkage?

kellnerp

Mechanical

Similar threads

Part and Inventory Search

Sponsor