Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
What happens to the strength of aluminum, A356 T6, after welding
- Thread starter digit339
- Start date
If welding in the T6 condition, you will loose properties
in and around the weld area. The properties in the welded area will be comparable to those in the annealed condition.
In addition, when welding in T6 (if welding is significant)you may induce stress which may result in cracks.
In order to obtain the original T6 properties after welding, you will need to re-solution heat treat (T4) and then age to obtain your T6 propertes. If you may be concerned about cracking, I would suggest annealing the part (375 F for 2 hours) prior to welding then solution heat treat and aging (after welding).
in and around the weld area. The properties in the welded area will be comparable to those in the annealed condition.
In addition, when welding in T6 (if welding is significant)you may induce stress which may result in cracks.
In order to obtain the original T6 properties after welding, you will need to re-solution heat treat (T4) and then age to obtain your T6 propertes. If you may be concerned about cracking, I would suggest annealing the part (375 F for 2 hours) prior to welding then solution heat treat and aging (after welding).
- Status
Similar threads
- Locked
- Question
- Question