yassou
Mechanical
- Mar 13, 2015
- 69
Hi everybody.
First of all see Below Image:
Property:
Part 1:
1)Density 2)Elastic(With Temperature-Depended data) 3)Plastic (With Strain-rate-Depended data) 5)Ductile Damage (With Damage Evolution) 6)Shear Damage (With Damage Evolution) 7)Expansion (With Temperature-Depended data) 8)Thermal Conductivity 9)Specific Heat
Part 2:
1)Density 2)Elastic 3)Plastic (Johnson-Cook With Hardening Rate-Dependent) 5)Johnson-Cook Damage (With Damage Evolution) 6)Expansion (With Temperature-Depended data) 7)Thermal Conductivity 8)Specific Heat
Step: Dynamic, Temp-disp, Explicit
Total Time: 6
Field Output Parameters:
A,CFAILURE,CFORCE,CSTRESS,DAMAGEC,DAMAGESHR,DAMAGET,DENSITY,DMICRT,E,ELEN,EVF,EVOL,FSLIPR,HFL,LE,NT,P,PE,PEEQ,PEEQVAVG,PEVAVG,RF,RFL,RT,S,SDEG,STATUS,SVAVG,TEMP,U,UR,UT,UVARM,V,VR,VT,
Interaction Property:
1)Tangential Behavior (With Temperature-Depended data) 2)Normal Behavior 3)Thermal Conductance 4)Heat Generation
Interaction Manager:
1)Surface-to-Surface Contact(Explicit) 2)Surface film condition
Mesh:
C3D8RT (With Viscous Hourglass control and other parameters in default selection)
Job:
Abaqus/Explicit precision: Single
Nodal output precision: single
===================================
I check the Property parameters and i think all of them is correct.
As you can see in image, Step Time after 0.999576 get repeated ?!
I don't know what is meaning of this ?
I don't have any error, also my Job Diagnostics (in Visualization) show no warning.
Now is there anybody know what should i do to solve this thing ?
With Best Regards.
yassou.
First of all see Below Image:
I'am simulating interaction of 2 Solid parts, and i mentioned some important parameters in below (Unfortunately I can not give full information):Abaqus warning window: said:
Property:
Part 1:
1)Density 2)Elastic(With Temperature-Depended data) 3)Plastic (With Strain-rate-Depended data) 5)Ductile Damage (With Damage Evolution) 6)Shear Damage (With Damage Evolution) 7)Expansion (With Temperature-Depended data) 8)Thermal Conductivity 9)Specific Heat
Part 2:
1)Density 2)Elastic 3)Plastic (Johnson-Cook With Hardening Rate-Dependent) 5)Johnson-Cook Damage (With Damage Evolution) 6)Expansion (With Temperature-Depended data) 7)Thermal Conductivity 8)Specific Heat
Step: Dynamic, Temp-disp, Explicit
Total Time: 6
Field Output Parameters:
A,CFAILURE,CFORCE,CSTRESS,DAMAGEC,DAMAGESHR,DAMAGET,DENSITY,DMICRT,E,ELEN,EVF,EVOL,FSLIPR,HFL,LE,NT,P,PE,PEEQ,PEEQVAVG,PEVAVG,RF,RFL,RT,S,SDEG,STATUS,SVAVG,TEMP,U,UR,UT,UVARM,V,VR,VT,
Interaction Property:
1)Tangential Behavior (With Temperature-Depended data) 2)Normal Behavior 3)Thermal Conductance 4)Heat Generation
Interaction Manager:
1)Surface-to-Surface Contact(Explicit) 2)Surface film condition
Mesh:
C3D8RT (With Viscous Hourglass control and other parameters in default selection)
Job:
Abaqus/Explicit precision: Single
Nodal output precision: single
===================================
I check the Property parameters and i think all of them is correct.
As you can see in image, Step Time after 0.999576 get repeated ?!
I don't know what is meaning of this ?
I don't have any error, also my Job Diagnostics (in Visualization) show no warning.
Now is there anybody know what should i do to solve this thing ?
With Best Regards.
yassou.