Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations SDETERS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

What load can change direction during nonlinear analysis ? 1

Status
Not open for further replies.

Tuman_1232

Aerospace
Oct 7, 2017
20
Hello everyone,
what type of load can be used, except pressure , to represent force with direction update due to geometric nonlinearity in non linear analysis?
I didn't find any other option except pressure.
Thanks in advance
 
Replies continue below

Recommended for you

You can apply Forces and moments as follower loads using APDL by employing FOLLW201 elements. I cannot help you out with details since not used myself. Fortunately, there is ACT extension available for this called Follower loads using the same technique of FOLLW201 elements but automated one.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor