Jun 20, 2021 #1 azadfar Industrial Jan 15, 2015 7 What's wrong with cutting piece 304 with air plasma and not with nitrogen?
Jun 21, 2021 #2 DVWE Petroleum Apr 5, 2007 2,248 Nothing is wrong with doing that. Compressed air will leave a highly oxidized edge that will have to be removed by grinding or other means. Nitrogen will give you a better cut edge. The devil is in the details; she also wears prada. Upvote 0 Downvote
Nothing is wrong with doing that. Compressed air will leave a highly oxidized edge that will have to be removed by grinding or other means. Nitrogen will give you a better cut edge. The devil is in the details; she also wears prada.
Jun 21, 2021 #3 EdStainless Materials May 20, 2004 15,958 And Argon will be cleaner yet. If you use air you will have a lot of clean-up work, grinding the cut and maybe pickling to remove other oxidation. = = = = = = = = = = = = = = = = = = = = P.E. Metallurgy, consulting work welcomed Upvote 0 Downvote
And Argon will be cleaner yet. If you use air you will have a lot of clean-up work, grinding the cut and maybe pickling to remove other oxidation. = = = = = = = = = = = = = = = = = = = = P.E. Metallurgy, consulting work welcomed
Jun 21, 2021 #4 Guest Please do not multi-post "Everyone is entitled to their own opinions, but they are not entitled to their own facts." Upvote 0 Downvote
Please do not multi-post "Everyone is entitled to their own opinions, but they are not entitled to their own facts."
