When printing a metric drawing how do enter in the scale?

[Sam2001]

I am not sure what scale you enter in the print mode because the drawing is metric (1:200) on a E- size paper.
what do I enter in where it would say 1/4" = 1'-0"

 

[borgunit]

A couple of questions. Are you plotting from Layouts (paperspace) or modelspace? Are you looking for 1:48 scale (.0208:1)? Have you tried selecting millimeters on the units and calculating scale from metric units? Let us know.

 

[rKeyTek]

Sam,
another guy had the same issue back in December.
Click on the link below to see some the previous solutions.

thread555-39089

Rich

 

[Sam2001]

Thanks for answering my question. I am plotting from paperspace. The scale is 1:200. I selected millimeters on the units. So where it says Plotted MM = Drawing Units what should I put? I tried 20=1 but the whole drawing did not print out, it did not print out the top part of the border. I am asking because I really don't have a clue, I have never had to print out a drawing using a metric scale. I used Turbocad to transfer the drawing from a plt. file to a dwg. file, because I have never plotted out a drawing with a plt. file. I hope I did not confuse you.