where are array buttons in SW2004?

[BlindChickenRacing]

Changing from 2001 to 2004, the thing I can't find is the array feature for either circular or linear arrays. I have even tried to use the 3D array but it will not accept the hole I have created in the part as a valid starting point.

The help file shows that there should be an array button for this feature but I have not been able to find it.

Thanks for any info.

-Mark


__________________________
Mark Johnson

http://www.blindchickenracing.com

 

[Theophilus]

You'll need to add those (along with others) back into your tool bars if they aren't shown already. The quick way is to right-click on a tool bar area and select Customize > Commands. Then drag what you want to each toolbar.




Jeff Mowry
Industrial Designhaus, LLC

http://www.industrialdesignhaus.com

 

[JNR]

If you are not using the command often enough to add it to your toolbars, use the drop down menus.

SW now call this a "Step and repeat".

Tools - Sketch Tools - Linear/Circular Step and Repeat.

Oooooooh, looky...... I just took a peek. They now have "Edit Linear/Circualr Step and Repeat" Haven't done one since 2004. Have they finally got this to a useful tool?!

John Richards Sr. Mech. Engr.
Rockwell Collins Flight Dynamics

There are only 10 types of people in the world - those who understand binary and those who don't.