Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
WHERE CAN I FING A SOURCE FOR MOTORS IN CAD SOLIDS
- Thread starter DERNST
- Start date
Yes, there is. But, it really depends on the manufacturer. I get the CD's from the Thomas Register, which have such files from the manufacturer. Some companies provide only 2D imgages for CAD, others have both 2D and 3D solids. Go to Thomas Register online, and ask for the CD's. They will arrive in short time, and you will have an entire library at your disposal, listed by manufacturer. I have used 2D drawings from companies, to generate 3D solids, as the dimensions are available off the 2D drawings. You will be surprised how many companies offer their 3D solids on those CD's.
The Thomas register will send you the updated CD's as they are offered. They are free, so no harm in getting them.
The Thomas register will send you the updated CD's as they are offered. They are free, so no harm in getting them.
- Status
Similar threads
- Question
- Question
- Locked
- Question