Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations IDS on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Where to find piping & flanges with EN 10204 - 3.1B certificate? 1

Status
Not open for further replies.

Sierra

Industrial
Mar 3, 2002
12
Hi,

Does anybody know US suppliers of 316SS piping and flanges (ANSI and DIN flanges) with the European EN 10204 - 3.1B material certification?
 
Replies continue below

Recommended for you

Note that the european 3.1B certificate used to be specified in accordance with DIN 50049. The EN 10204 standard is adopted from this standard. Just in case, this may ring a bell for a supplier.

Basically it means that the material certificate or mill report shall be issued by the manufacturers (own) independent inspection unit/department)

I would assume that any US supplier who has ever supplied piping components to Europe will be familiar with this type of certificate.

regards
Mogens
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor