Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Where to find this part

Status
Not open for further replies.

schulkfl

Mechanical
Jan 31, 2008
10
US
Please see the link for picture-

Does anyone know what this is called and where I can find it? The silver cone shape rotates around the black part. This seems like a pretty standard part however I've done a pretty good search on the internet and haven't had much luck. Any help is greatly appreciated.

Thanks!
Fred S
 
Replies continue below

Recommended for you

It appears to be a "core chuck" with an integral bearing. It is used to center rolls of material or cylinders on shafts. The integral bearing is less common. Normally the chuck mounts on a shaft that has bearings (a "live" shaft versus a "dead" shaft). Google "tapered core chuck".

It could also be called a live-center but that will lead to mostly machine tool parts.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top