Eng-Tips is the largest engineering community on the Internet
Intelligent Work Forums for Engineering Professionals
-
Congratulations waross on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Which criteria should I use to design internals in a packing column?
- Thread starter Hdez
- Start date
You can let the packing manufacturers help with that. Packing height has to do with the strength of the packing (fragile packing can't withstand the compression). Redistribution is also used to introduce intermediate reflux streams or after intermediate product draws.
- Status
Similar threads
- Locked
- Question