Who makes the highest flow CNG injectors?

[mymomo]

Hi All,

I am having trouble finding CNG injectors that can support over 100HP/cylinder or 75 lbs/hr @7000RPM ? I am planning on running 8-10bar of line pressure. Are there any off-the-shelf injectors available? Thank you so much!

 

[Lou Scannon]

Yes



"Schiefgehen will, was schiefgehen kann" - das Murphygesetz

 

[ivymike]

Hehhe..I was going to say "Woodward probably has the largest" bu then I clicked the link and discovered it had already been said. 100hp/cyl doesnt sound like a very big need though...I think Woodward cover some 500hp/cyl engines too.

 

[PJGD]

Read up on this:

http://delphi.com/pdf/techpapers/2013-01-0863.pdf

Taken from here:

http://delphi.com/news/techpapers/

PJGD

 

[dgallup]

Curious that the link says the max flow rate is 2.5 g/s at 8 bar but the flow curve clearly shows something over 3 g/s at 8 bar.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.

 

[Lou Scannon]

I didn't look at the link, but could be a conversion factor between N2 and CNG.

"Schiefgehen will, was schiefgehen kann" - das Murphygesetz

 

[turbocohen]

Mymomo, This does not sound like a regular production application.. is it?