hollerg
Chemical
- Mar 22, 1999
- 97
I am specifying a K/O pot-->deflagration arrester-->Fume incinerator. Upstream is a 500 ft line from a dilute caustic scrubber. Condensation in the transfer line is likely.
What design for the K/O to request, like for a flare >300 micron, or <10? W/ the downstream DA acting as a chevron style separator element I imagine 300 micron is too high. Comments?
What design for the K/O to request, like for a flare >300 micron, or <10? W/ the downstream DA acting as a chevron style separator element I imagine 300 micron is too high. Comments?
