Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Why we are going for A106Gr.B and not for A106Gr.A/C

Status
Not open for further replies.

hiren3010

Mechanical
Joined
Dec 16, 2003
Messages
5
Location
IN
I wanted to know why we r using the A106 Gr.B and not A106 Gr.A/C?
same is for A516 Gr.60.... this material is used in our company more frequently than A516 Gr.70...

Why it is so? why certain grades are more popular?
I wanted to know more about material selection.
can u help in that?

Thank u in advance.
 
Typically, material grades like the above are selected based on application, availability and cost of material. What is your application for using these materials?
 
One of the differences in some of the grades will be notch toughness at lower temperatures- one reason for using A516-60 over A516-70, for example. In the case of pressure vessels, tanks, etc., this distinction is made in the design codes.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top