Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Wilton [or compatible] stuff wanted

Status
Not open for further replies.

1capybara

Industrial
Aug 3, 2008
40
I did a keyword search and unfortunately
Wiltron stuff isnt common here.
But im looking for these Wiltron [or compatible] things:

1. my wiltron 401 power meter has a BNC input.
I have BNC to N and BNC to sma adapters.
I need a power detector that works in the 2-4 ghz range,

2. my wiltron 610 sweeper needs an rf pug-in that works in the 2-4 ghz range.

Ive looked on ebay, but i CANT pay $400 for a detector !!!
:)

 
Replies continue below

Recommended for you

Microwave equipment is extremely expensive. $400 is fairly low cost for things in this frequency range. Network Analyzers are $25K for the least expensive unit.

The plug in's for equipment are usually the expensive part of the equipment. The frame is often just a power source and display.

kch
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor