goldfields
Mechanical
- Feb 8, 2001
- 5
I am looking for the Input/Output wiring diagrams for a Ling Dynamic Systems Shaker, model V1006, serial nr. 143.
It is to be coupled to the controller/amp combination that follows:
Sine Program Generator Make: LDS
Model: SPC 4
Serial: 325
as well as a seperate component
Make: LDS
Model: RD200
Serial: 198
Amplifier (?) Field Power Supply Make: PYE Ling
Type: STAB4
Serial: 198143.
All the mentioned components were donated in an 'as is' state, with no manuals or reference texts whatsoever. LDS UK only supports products for 7 years after production ceases; the shaker is apparently more than 20 years old. There is no markings on the wires themselves, so colour configuration will probably be used.
It is to be coupled to the controller/amp combination that follows:
Sine Program Generator Make: LDS
Model: SPC 4
Serial: 325
as well as a seperate component
Make: LDS
Model: RD200
Serial: 198
Amplifier (?) Field Power Supply Make: PYE Ling
Type: STAB4
Serial: 198143.
All the mentioned components were donated in an 'as is' state, with no manuals or reference texts whatsoever. LDS UK only supports products for 7 years after production ceases; the shaker is apparently more than 20 years old. There is no markings on the wires themselves, so colour configuration will probably be used.
