witch Assembly constraint do the trouble and blocks the others

[Ehaviv]

Hi
I have an Assembly with many constraints
and when come to add a component I can do a constraint
but the positioning not applied

And I do not know witch ones to delete to free
This blocking.

Thank you for any help

 

[Ehaviv]

using nx8.53

 

[NutAce]

The constraint navigator will show you which constraints are conflicting..
The conflicting constraint shows a traffic sign icon..

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[Ehaviv]

Hi
But
In The constraint navigator all the constraints are
marked by a yellow icon see the image in this post

and so I can not see witch the first constraint make blocking
the others (suppress and unsuppress is bad way and I do not know if will help)

nutace Thank you for any help

 

[NutAce]

First make sure all of your components are fully loaded. At least NX will then be able to solve the constraints which are correct.

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[Ehaviv]

I feel this will help

Thank you very much

 

[Ehaviv]

Because I have two weeks to get back to my work
to check that meanwhile the thought push me ahead
To ask
Do wave link freeze (in our ccompany we do freeze before dwg release)

Can do this ? Do if I unfreeze can removes this
Out of date icons

 

[NutAce]

What exactly do you mean with Freeze?

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[Ehaviv]

Assemblies ==> WAVE ==> Associativity Manager
and on the opend dialog I press 'Edit Frozen Status' Button and then on the opened dialog
I move the assembly parts master and non-master to the 'Persistent Frozen Parts' window
and OK the dialog

 

[NutAce]

That might be a cause as well..I am assuming, because the link is frozen NX can't get the correct status of the wave parent..

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[Ehaviv]

I do a search for "part is locked and cannot be updated" and found same problem in this post
So now I know that this is the solution

http://www.eng-tips.com/viewthread.cfm?qid=337134